Cathedral Brand Engineered Oak Flooring - Natural grade

Cathedral Brand Engineered Oak Flooring is an engineered floor with a 15 mm WBP (Exterior Grade) Birch plywood substrate and a 6 mm European Oak wear layer available in two grades. Character grade contains knots and shows the floor as real wood with the life of the tree highlighted by the grain structure and colour associated with the formation of branches from which the knots originate. This grade comes unfinished or factory pre oiled. Our Natural grade is a much clearer floor with hardly any knots and those that exist are small and few and far between. The grain structure is still colourful but not as vigorous as the character grade. Natural grade is not available in all sizes. This grade comes unfinished only. This floor is filled and sanded with micro bevels both long edges only and T & G jointed all four sides. Lengths in the pack equal 9.6 lineal m with the square meters per pack dependent on the board width. The pack consists of 3 full 2.4 m boards and cut board. 2.4, 2.4 900, 1500,600, 1800. This is a very good length specification with 75% long boards, five boards per pack. The shortest length in the pack is 600 mm with only one allowed. Laid to specification this floor can be nailed down, secrete screwed, stuck down or floated. Suitable for use over Underfloor heating when laid to our guidelines.

Guaranteed.

See our Cathedral Brand Engineered Oak Flooring Unboxing video for a better look at this product.

Showing the single result

Showing the single result